11/12/2022 0 Comments Gs500 ignition advancer test![]() Ive tested the coils and I get the same reading for both. ![]() So I did all of this and I coudnt get a spark for the right or left side, but when i turn the motor over the left side sparks normally and the right one doesnt do anything. When both probes touch the lead wire terminals, the right spark plug should spark. Connect the + probe to the black wire terminal on the ignitor and the - probe to the yellow, black, and green terminals respectively. Using a meter set to RX1, test the ignitor unit. Disconnect the signal generator lead wire from the ignitor. Remove both spark plugs and put them on the cylinder head with plug cap attached. ![]() Tried testing the cdi unit how it suggested in the book and i wasnt getting the results that the book said i needed which is, I thought it was the pick up coils so i replaced the signal generator and I still have the same problem. ![]() Theres no spark on the right cylinder but there is on the left. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |